03.04.2025 13:00 - 13:30
03.04.2025 16:00 - 16:30
Descripción del producto
Level sensors type T-20_.F... are approved by the DIBt (German Institute for Structural Engineering) as liquid level limit switches for the overcharge protection of containers for storing water-dangerous liquids.
Datos técnicos
Conexión
- Caja
- Ex-Polyester
- Caja
- Ex-Aluminium
Propiedades
- Clase de protección EN60529
- IP 65
- Rosca de conexión
- G2"
- Tuerca de unión
- G 2¾"
- Longitud del tubo guía
- max. 6 m
- Temperatura de funcionamiento
- -20…+60 °C
- Presión de funcionamiento
- max. 6 bar je nach Ausführung
- Densidad del medio
- ρ ≥ 0,72 g/cm³ (je nach Schwimmertyp)
- Histéresis de conmutación
- 2 mm
- Tolerancia del punto de conmutación
- max. 2 mm
Valor de resistencia
- Disponibilidad operativa
- ca. 1 kΩ
- Alarma de sobrellenado
- ca. 12 kΩ
- Tiempo de conmutación
- ca. 20 ms
- Protección Ex
- siehe Baumusterprüfbescheinigung
- Marcado CE
- siehe Konformitätserklärung
T-200.F Ex Configurar
T20 - [ 1 ] - [ 2 ] - [ 3 ] - [ 4 ] - [ 5 ] - [ 6 ] - [ 7 ] - [ 8 ] - [ 9 ] - [ 10 ]
product description
Die Magnettauchsonden T20... dienen zur Erfassung von Füllstandsgrenzwerten in Behältern für flüssige Medien, wobei im Gasraum über der Flüssigkeit eine explosionsfähige Atmosphäre der Zone 0 (Kat. 1) und außerhalb des Behälters, im Bereich der Anschlussdose, Ex-Zone 1 (Kat. 2), gegeben ist.
Más información del producto
The floater switches the reed contact mounted in the guide tube when the liquid level rises. The change in resistance in the sensor circuit resulting from the switching operation is evaluated and the output relay triggered.
Parts of the level sensor which get into contact with the media are completely made of PE, PP, PVC, PVDF. So the level sensors T-20_.F... are perfectly suited for being used with tanks for storing highly aggressive media.
The overfill cut-out device consists of the level sensor and the measuring transducer. Our “contact protective relays” type KR-163... and KR-268..., which are also approved by the DIBt, can be used as corresponding measuring transducers (see section 10). The level sensors T-20_.F... can be connected to our “alarm indicators” type OAA-100 and OAA-300.
- Easy to install
- Sturdy design
- Small dimensions
- Interference-proof measurement
- Switching point adjustable
- Various options for connection (connector box / plug / cable)
- For usage in category 2 (Ex zone 1) (in combination with [Ex]i contact protective relay KR-163/A/Ex)
- Short-line fault / open circuit monitoring (in combination with contact protective relay KR-163... and KR-268... / alarm indicator OAA-100...)
- Under the F-contact further optional switching points can be realized
- Under the F-contact its also possible to integrate a continuous measurement
Documentos y descargas
Instrucciones de ajuste
Instrucciones de seguridad
Certificado de prueba
Vídeo sobre el producto
Accesorios
OAA-300
Ir al producto
